05
5-113
Charging smart phone
The wireless smart phone charging
system charges only the Qi-enabled
smart phones (
). Read the label on
the smart phone accessory cover or
visit your smart phone manufacturer’s
website to check whether your smart
phone supports the Qi technology.
The wireless charging process starts
when you put a Qi-enabled smart phone
on the wireless charging unit.
1. Remove other items, including the
smart key, from the wireless charging
unit. If not, the wireless charging
process may be interrupted. Place
the smart phone on the center of the
charging pad.
2. The indicator light is orange when the
smart phone is charging. The indicator
light will turn blue when phone
charging is complete.
3. You can turn ON or OFF the wireless
charging function from the Settings
menu in the infotainment system
screen. Select:
- 6HWXSƟ9HKLFOHƟ&RQYHQLHQFHƟ
Wireless Charging
If your smart phone is not charging:
- Slightly change the position of the
smart phone on the charging pad.
- Make sure the indicator light is
orange.
The indicator light will blink orange for 10
seconds if there is a malfunction in the
wireless charging system.
In this case, temporarily stop the
charging process, and re-attempt to
charge your smart phone.
The system warns you with a message on
the LCD display if the smart phone is still
on the wireless charging unit after the
vehicle is turned OFF and the front door
is opened.
ś High speed wireless charging can
be activated only when the cellular
phones equipped with a wireless
charging function is on the charging
pad.
ś During wireless charging, the internal
fan operates to prevent the charging
pad from becoming hot. This may
cause fan noise.
Information
For some manufacturer’s smart phones,
the system may not warn you even though
the smart phone is left on the wireless
charging unit. This is due to the particular
characteristic of the smart phone and not
a malfunction of the wireless charging.
To Next Page
Loading...
Need help?
General
