07
7-25
ś If the rear corner radars have been
replaced or repaired, have the
system inspected by an authorized
retailer of Genesis Branded products.
ś Use only genuine parts to repair the
rear bumper where the rear corner
radar is located.
ś Do not apply license plate frame or
objects, such as a bumper sticker,
film or a bumper guard near the rear
corner radar.
ś The system may not work properly
if the bumper has been replaced, or
the surroundings of the rear corner
radar has been damaged or paint has
been applied.
ś If a trailer, carrier, etc. is installed,
it may adversely affect the
performance of the rear corner radar
or the system may not operate.
Information
For more details on the precautions of
the front view camera, refer to “Forward
Collision-Avoidance Assist (FCA)” section
in chapter 7.
Blind- Spot Safety system
Settings
Setting features
OIK070125L
Blind-Spot Safety
With the engine on, select or deselect
œ'ULYHU$VVLVWDQFHƟ%OLQG6SRW6DIHW\Ŕ
from the Settings menu to set whether or
not to use each function.
- ,Iœ$FWLYH$VVLVWŔLVVHOHFWHGWKH
system will warn the driver with a
warning message, an audible warning,
steering wheel vibration and braking
assist will be applied depending on
the collision risk levels.
- ,Iœ:DUQLQJ2QO\ŔLVVHOHFWHGWKH
system will warn the driver with
a warning message, an audible
warning and steering wheel vibration
depending on the collision risk levels.
Braking will not be assisted.
- ,Iœ2IIŔLVVHOHFWHGWKHV\VWHPZLOOWXUQ
off.
To Next Page
Loading...
Need help?
General
