07
7-27
OIK070147N
Warning Volume
With the engine on, select ‘Driver
$VVLVWDQFHƟ:DUQLQJ9ROXPHŔIURPWKH
Settings menu to change the Warning
9ROXPHWRœ+LJKŔœ0HGLXPŔœ/RZŔRUœ2IIŔ
for Blind-Spot Safety system.
However, when Warning Volume is
turned off, the steering wheel vibration
function will turn on if it was turned off.
If you change the Warning Volume,
the warning volume of other Driver
Assistance systems may change.
CAUTION
ś The setting of the Warning Timing
and Warning Volume applies to all
functions of the Blind-Spot Safety
system.
ś Even though ‘Standard’ is selected
for Warning Timing, if the vehicles
approaches at high speed, the initial
warning activation time may seem
late.
ś Select ‘Late’ for Warning Timing
when traffic is light and when driving
speed is slow.
Blind- Spot Safety system
Operation
Warning and control
OHY059005
Vehicle detection
ś To warn the driver, a vehicle is
detected, the warning light on the
side view mirror and head-up display
(if equipped) will illuminate.
ś The system will operate when your
vehicle speed is above 12 mph (20
km/h) and the speed of the vehicle in
the blind spot area is above 7 mph (10
km/h).