Driver assistance system
7-72
Limitations of Navigation-based
Smart Cruise Control
Navigation-based Smart Cruise Control
may not operate normally under the
following circumstances:
ś The navigation is not working properly
ś Map information is not transmitted
due to infotainment system's
abnormal operation
ś Speed limit and road information in
the navigation is not updated
ś The map information and the actual
road is different because of real-time
GPS data or map information error
ś The navigation searches for a route
while driving
ś GPS signals are blocked in areas such
as a tunnel
ś A road that divides into two or more
roads and joins again
ś The driver goes off route set in the
navigation
ś The route to the destination is
changed or canceled by resetting the
navigation
ś The vehicle enters a service station or
rest area
ś Android Auto or Car Play is operating
ś The navigation cannot detect the
current vehicle position (ex: elevated
roads including overpass adjacent to
general roads or nearby roads exist in
a parallel way)
ś The navigation is being updated while
driving
ś The navigation is being restarted while
driving
ś The speed limit of some sections
changes according to the road
situations
ś Driving on a road under construction
ś Driving on a road that is controlled
ś There is bad weather, such as heavy
rain, heavy snow, etc.
ś Driving on a road that is sharply
curved
To Next Page
Loading...
