07
7-97
OIK070147N
Warning Volume
With the engine on, select ‘Driver
$VVLVWDQFHƟ:DUQLQJ9ROXPHŔIURPWKH
Settings menu to change the Warning
9ROXPHWRœ+LJKŔœ0HGLXPŔœ/RZŔRUœ2IIŔ
for Rear Cross-Traffic Safety system.
However, when Warning Volume is
turned off, the steering wheel vibration
function will turn on if it was turned off.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
CAUTION
ś The setting of the Warning Timing
and Warning Volume applies to
all functions of the Rear Collision-
Avoidance Assist.
ś Even though ‘Standard’ is selected
for Warning Timing, if the vehicles
from the left and right side approach
at high speed, the initial warning
activation time may seem late.
ś Select ‘Late’ for Warning Timing
when traffic is light and when driving
speed is slow.
Information
If the engine is restarted, Warning Timing
and Warning Volume will maintain the
last setting.
Rear Cross-Traffic Safety system
Operation
Warning and control
Rear Cross-Traffic Safety system will
warn and control the vehicle depending
RQFROOLVLRQOHYHOœ&ROOLVLRQ:DUQLQJŔ
œ(PHUJHQF\%UDNLQJŔDQGœ6WRSSLQJ
YHKLFOHDQGHQGLQJEUDNHFRQWUROŔ
OHY059005 OIK070074
OIK070075
Collision Warning
ś To warn the driver of an approaching
vehicle from the rear left/right side
of your vehicle, the warning light on
the side view mirror will blink and a
warning will appear on the cluster. At
the same time, an audible warning
will sound. If Rear View Monitor is
operating, a warning will also appear
on the infotainment system screen.