Genesis G90 - Page 6

Quick Reference Guide I 06
05 I Quick Reference Guide
GENESIS G90
FEATURES AND CONTROLS
ADJUSTING PASSENGER'S SEAT FORM DRIVER’S SIDE
Seating position, seatback angle and
cushion angle/height of the front
passenger seat can be adjusted by
operating the switches from the
driver’s seat.
PASS
1. While the Engine is ‘ON’, press the massage button on the driver’s Press
the passenger seat control button on the door of the driver’s seat and the
indicator light will turn on.
2. Operate the switch on the driver’s seat to adjust the front passenger seat.
• If you do not adjust the front passenger seat within 15 seconds of
pressing button it will automatically turn off.
ARMREST TOUCHSCREEN
Rear seat control
(Armrest touchscreen)
1
Fan speed control
2
Temperature control
3
OFF (system off)
4
AUTO (automatic control)
5
Mode selection
6
SYNC
Front seat control from the rear
(Armrest touchscreen)
1
Driver’s temperature control
2
Passenger’s temperature control
3
Fan speed control
4
Driver’s mode selection
5
Passenger’s mode selection
6
AUTO (automatic control)
7
OFF (system off)
8
Air intake control
9
A/C (air conditioning)
10
Built in diffuser
11
Front control
Rear seat control
Front seat control from rear
NOTE: The seatbacks can be folded
with the seatback recline lever.
1
1
4
4
2
2
3
3
5
5
6
6
7 8910
DRIVER SEAT MASSAGE FEATURE (if equipped)
SMART POSTURE ASSIST
Use the massage function to relax
after a long drive, or when resting
inside the vehicle.
After driving for an hour, Posture Assist automatically adjusts the pelvis
and back portion of the seat to assist the posture.
To turn off the Posture Assist when it is running, press the massage but
on the drivers door.
You can activate or deactivate Posture Assist function from the Settings
menu in the infotainment system screen.
Select:
Setup > Vehicle > Seat > Driver Seat > Ergo-
Motion Seat > Smart Posture Assist
1. While the Engine is ‘ON’, press the massage button on the driver’s
seat door to start the function. The light indicating massage intensity
level will illuminate.
2. Press the button again to set the intensity level.
• Each time you press the button, the intensity setting of the Massage
it is changed as follows: High > Medium > Low > OFF
• To stop the function, press the button multiple times until the
indicator light turns off.