Pressing the ↵ (Edit) key will move back to the Clock menu screen and
save the new time to the machines memory. Confirm that the status line
at the bottom of the screen displays the correct time when Time is
highlighted.
N.B. When set to 12 hour format, the program will only allow the
engineer to set the numbers 0 or 1 in the first field. Once the number 24
has been entered via the
▲ (up) or ▼ (down) keys to indicate 24 hour
format, the engineer can reset the first two values to reflect 10:30 PM in
24 hour format e.g. 22:30.
3. Daylight Saving: From the Clock menu
screen press the
▼ (down) key to highlight
the Daylight Saving menu followed by the
↵ (Edit) key. The LCD will display the
screen as shown opposite.
By default daylight savings time is set to Off. To choose one of the
available options, press the
▲ (up) or ▼ (down) key until selected
(indicated by the filled radio button) followed by the ↵ (Edit) key. Ensure
that the required setting is displayed in the status line at the bottom of the
screen. Press the X (Exit) key to return to the main menu.
4.8.3 Language Setup
From this menu the engineer can specify the language that the machine will use
to display messages, programming information etc. The default language for the
machine is set to English U.K. To change the language setting:
1. From the System Settings menu, use the
▼
(down) key to highlight the Language Setup
menu and press the ↵ (Edit) key. The LCD
will display the screen as shown opposite.
Using the
▲ (up) or ▼ (down) keys, select
the desired language option (indicated by
the filled radio button).
2. Press the ↵ (Edit) key to save the language option and return to the
System Settings menu. Verify that the chosen language is displayed in the
status line at the bottom of the display when Language Setup is highlighted.
4.8.4 Monetary
From this menu the engineer can select the type of coin/card mechanism or
note reader fitted to the machine, select the coin set and configure values for
low change, multiple vends, credit for failed vends etc.
Technical Manual
50