The Monetary menu can display up to 11 sub menus, depending on machine
configuration, as listed below:
• Coin Mechanism
• Bill Validator
• Card Reader
• Bill Stack Option
• Multiple Vend Mode (Only if MDB mech. selected)
• Change Without Purchase (Only if MDB mech. selected)
• Low Change Message (Only if MDB mech. selected)
• Accept On Low Change (Only if MDB mech. selected)
• Credit for Failed Vend (Only if MDB mech. selected)
• Card Re-Value (Only if MDB card reader / key system is selected)
• Display Coin Set
Select The Coin Mechanism:
1. From the Monetary menu highlight Coin
Mechanism and press the ↵ (Edit) key. The
Coin Mechanism screen allows the
engineer to select one of the options
shown. Using the
▲ (up) or ▼ (down)
keys, select the desired coin mechanism
option (indicated by the filled radio button).
2. Press the ↵ (Edit) key to save the selection and return to the Monetary
menu. Verify that the chosen coin mechanism option is displayed in the
status line at the bottom of the display.
N.B. An Executive Card/Key system (if fitted) is enabled when Exec Coin
Mechanism is selected.
Select The Bill Validator: (USA Machines only)
N.B. A Bill Validator unit can only be mounted in a base cabinet supplied with
the Genesis machine.
1. From the Monetary menu press the ▼
(down) key to highlight Bill Validator and
press the ↵ (Edit) key. Using the ▲ (up)
or ▼ (down) keys, select the desired bill
validator option (indicated by the filled
radio button).
2. Press the ↵ (Edit) key to save the selection and return to the Monetary
menu. Verify that the chosen Bill Validator option is displayed in the status
line at the bottom of the display.
Coin Mecha nism
No Coi n Mechan ism
MDB Coin Mechan ism
Exec Coin Mechanis m
Technical Manual
51
To Next Page
Loading...
Need help?
General