Select The Card/Key Reader (MDB Systems Only):
N.B. An Executive protocol card/key system emulates an Executive coin
mechanism and is selected via the
Coin Mechanism menu (see page 51).
1. From the Monetary menu press the
▼
(down) key to scroll down and highlight
Card Reader and press the ↵ (Edit) key.
Using the ▲ (up) or ▼ (down) keys, select
the desired card reader option (indicated
by the filled radio button).
2. Press the ↵ (Edit) key to save the selection and return to the Monetary
menu. Verify that the chosen option is displayed in the status line at the
bottom of the display.
Configure Bill Stack Option:
N.B. It is unlikely that Bill Stack Option will be required for Genesis machines.
The following description is for information only.
The Bill Stack Option specifies how the machine accepts notes and returns
change. The engineer can set one of two options:
(i) Escrow If Low Change: Change will be returned to the customer
when the coin return is pressed even if no purchase has been made.
(ii) Stack All Bills: With this option selected, any notes tendered will
be stacked and the customer will have to make a purchase in order to
receive change.
1. From the Monetary menu press the ▼
(down) key to highlight Bill Stack Option
and press the ↵ (Edit) key. Using the ▲
(up) or ▼ (down) keys, select the desired
bill stack option (indicated by the filled
radio button).
2. Press the ↵ (Edit) key to save the selection and return to the Monetary
menu. Verify that the chosen bill stack option is displayed in the status line
at the bottom of the display.
Technical Manual
52
To Next Page
Loading...
Need help?
General