EasyManuals Logo
Home>Genesis>Vending machines>Instant

Genesis Instant User Manual

Genesis Instant
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
2.2 Connecting the Water Supply
1. The machine should be situated within 1 metre of a drinking water supply
from a rising main, terminating with a W.R.C. approved 15mm
compression stop-tap.
2. The water supply should comply with both the Statutory Instrument
No.1147 - “Water, England and Wales” and The Water Supply (Water
Quality) Regulations 1989. Water pressure at the stop-tap must be within
the limits 2 - 6 Bar (200 Kpa - 600 Kpa).
3. Connect the flexi-hose supplied with the machine to the stopcock ensuring
that the seal supplied is fitted correctly. Flush the system (several gallons)
before connecting the machine.
4. Connect the hose to the inlet valve located on the rear of the machine. Ensure
that the seal is correctly fitted. Ensure that all water supply fittings are tight.
5. Freshbrew & B2C Machines: Genesis machines fitted with a paperless
freshbrew brewer or CoEx® brewer must be connected to the water
supply via a water filter. This filter must be of food grade quality and able
to remove temporary hardness (scale), heavy metals (lead, copper, iron,
cadmium), chlorine and any organic pollutant's/discolouration. Crane
Merchandising Systems recommend and supply the Brita AquaQuell
Compact water filter.
Note! If the machine is connected to the
water supply and used without a water filter as
specified above, the warranty will be void.
6. Turn on the water supply at the stop tap and
check for leaks. Prime the water filter (where fitted) following the instructions
supplied by the filter manufacturer.
2.3 Connecting the Electricity Supply
Safety First! The machine must be earthed. On no account should it be
earthed
only
to the water supply pipe.
The machine must be connected to a 230 Volt 50Hz 13 amp fused switched socket
outlet, installed to the latest edition of the IEE regulations, using a 3 pin BS approved
13 amp fused plug.
Important: If the mains lead becomes damaged in any way it must be replaced by a
special lead available from the manufacturer.
10
Operators Manual

Table of Contents

Other manuals for Genesis Instant

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Genesis Instant and is the answer not in the manual?

Genesis Instant Specifications

General IconGeneral
BrandGenesis
ModelInstant
CategoryVending machines
LanguageEnglish