7.1.5 SureVend
This menu becomes available when SureVend is enabled via the Product
Configuration menu (see page 45).
1. From the Data Recall menu scroll down
and highlight SureVend then press the ↵
(Edit) key. The LCD will display the screen
as shown opposite. From this menu screen
the operator can view and record the
number of cup drop failures that SureVend
has logged and also the number of SureVend assisted vends.
2. Once the operator has viewed and recorded the data it can be cleared via
the Clear Data menu as described previously.
7.1.6 Mug Vends
This menu displays the number of vends that
the machine has made without dropping a cup.
Once the operator has viewed and recorded
the data it can be cleared via the Clear Data
menu as described previously.
7.1.7 Print Data
This menu displays the data that can be
extracted from the machine when a printer is
connected and the corresponding keypad
number which needs to be pressed to send the
data to the printer.
7.2 Diagnostic Menu
1. Should a fault occur within the machine, the LCD will display a fault
message and in some cases the machine may become inoperable. By
accessing the Diagnostic menu and viewing the fault description the
operator can in most cases clear the fault and quickly bring the machine
back into service.
2. When the fault cannot be easily remedied by the operator and requires
the services of an approved engineer, the diagnostics screen text displayed
enables the engineer to quickly and easily locate and repair the problem,
reducing machine down time.
41
Operators Manual
To Next Page
Loading...
Need help?
General