EasyManuals Logo

Genesis KBWA-23D User Manual

Genesis KBWA-23D
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
29
12.1 MINIMUM SPEED TRIMPOT (MIN)
Sets the minimum speed of the
motor. The MIN Trimpot is factory
set to 0% of frequency setting.
For a higher minimum speed setting,
rotate the MIN Trimpot clockwise.
See Figure 17.
12.2 MAXIMUM SPEED TRIMPOT (MAX)
Sets the maximum speed of the
motor. The MAX Trimpot is factory
set to 100% of frequency setting.
For a higher maximum speed
setting, rotate the MAX Trimpot
clockwise. For a lower maximum
speed setting, rotate the MAX
Trimpot counterclockwise. See Figure 18.
12.3 ACCELERATION TRIMPOT (ACC)
Sets the amount of time for the
motor to accelerate from zero speed
to full speed. The ACC Trimpot is
factory set to 1.5 seconds.
For longer acceleration time, rotate
the ACC Trimpot clockwise. For
more rapid acceleration, rotate the
ACC Trimpot counterclockwise. See Figure 19.
Note: Rapid acceleration settings may cause the current limit circuit to activate, which
will extend the acceleration time.
FIGURE 17
MINIMUM SPEED TRIMPOT (MIN) RANGE
FIGURE 18
MAXIMUM SPEED TRIMPOT (MAX) RANGE
FIGURE 19
ACCELERATION TRIMPOT (ACC) RANGE

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Genesis KBWA-23D and is the answer not in the manual?

Genesis KBWA-23D Specifications

General IconGeneral
BrandGenesis
ModelKBWA-23D
CategoryController
LanguageEnglish