Genesys ADMA-G - Figure 54 Example Wiring Diagram of the ADMA and External Velocity

ADMA 3.0
USER MANUAL
Document Revision 2.01 | 2021 Page 73/137
9.8.1 Wiring external velocity
The following diagram shows an example wiring of the external velocity and data logging via Ethernet
for use with GeneSys “ADMA-PP” Post Processing Software.
Figure 54 Example wiring diagram of the ADMA and external velocity
[DC In]
Power In
[Ethernet 1]
DAQ with GeneSys Ethernet Logger
[GNSS Ant 1]
GNSS Antenna
ADMA-CABLE-SUPPLY-xM
ADMA-CABLE-ETH-xM
ADMA-CABLE-GPS-xM
[Ext Vel] (ADMA-G only)
External velocity eg. Kistler Correvit
ADMA-CABLE-SPEED-IN-xM