Genie GS-3232 User Manual

Sixth Edition • Ninth Printing Operator's Manual
Transport and Lifting Instructions
Part No. T107026 GS-30 • GS-32 • GS-46 • GS-47 71
Lifting Instructions
Fully lower the platform. Be sure the extension
deck, controls and component trays are secure.
Remove all loose items on the machine.
Determine the center of gravity of your machine
using the table and the picture on this page.
Attach the rigging only to the designated lifting
points on the machine. There are two 2.5 cm holes
on the front of the machine and two holes in the
ladder for lifting.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
Center of Gravity Table
Model X Axis Y Axis
GS-1530
49.8 cm 47.2 cm
GS-1532
49.8 cm 47.2 cm
GS-1930
50.8 cm 49.5 cm
GS-1932
50.8 cm 49.5 cm
GS-2032
80.9 cm 53.9 cm
GS-2632
82.2 cm 59.3 cm
GS-3232
78.7 cm 67.3 cm
GS-2046
82.7 cm 56.8 cm
GS-2646
88.2 cm 56.4 cm
GS-3246
83.7 cm 59.9 cm
GS-4047
85.8 cm 51.5 cm

Genie GS-3232 Specifications

General

Lift Capacity	500 lbs
Power Source	Electric
Battery Voltage	24 V
Gradeability	25%
Platform Height	32 ft
Machine Width	32 in
Drive Speed - Stowed	3.5 km/h
Drive Speed - Raised	0.5 mph
Drive Speed	3.5 km/h
Overall Width	32 in
Working Height	38 ft