Need help?Do you have a question about the Genie Z-45 and is the answer not in the manual?
General| Brand | Genie |
|---|---|
| Model | Z-45 |
| Category | Lifting Systems |
| Language | English |
Details electrical hazard risks, required clearances, and safety measures.
Outlines weight limits and stability concerns to prevent machine tip-overs.
Specifies safe operating limits and procedures for driving on slopes.
Mandates fall protection equipment and safe platform practices for occupants.
Advises on awareness of blind spots, tailswing, and overhead obstructions.
Details precautions against fire and explosion risks, particularly for Bi-Energy models.
Warns about hydraulic/air leaks, component contact, and compartment access.
Stresses using only undamaged, well-maintained machines and proper inspection.
Advises against using the machine for welding or incorrect battery charging.
Provides detailed safety guidelines for handling, charging, and maintaining batteries.
Details the functions of switches and controls on the ground control panel.
Explains the functions of the platform control panel components and indicators.
Explains the importance and process of pre-operation inspections before each work shift.
Lists components and areas to check during the pre-operation inspection.
Details how to determine slope grade and safe operating limits on slopes.
To Next Page
