Genius G-Shot D1211 - Using Thumbnails Mode; Auto Play; PC Mode; Storage Option Mode

English
-25
time browse the previous or next image or video clip.
Using thumbnails mode
In Playback mode, in factory settings, display images will fit to screen, but it is also possible
to display nine thumbnails on the LCD.
To view thumbnails:
1. Switch on the camera and ensure that it is in the Playback mode. The most recent
picture or video clip will be displayed on the LCD display.
2. Press Set/ Function button to access the Playback menu.
3. Press Mode selector button twice to display nine thumbnails per screen.
4. Use the Up/ Down shift selector button to select images. A red frame will highlight the
selected image. Press the Set/ Function button or Mode selector button to display the
selected image (in the red frame) fitted to screen.
Auto play
The camera includes an auto play function. A slideshow displays each image in turn with a
predefined delay between each picture.
1. Switch on the camera and ensure that it is in the Playback mode. The most recent
picture or video clip will be displayed on the LCD display.
2. Press Set/ Function button to access the Playback menu.
3. Press Up/ Down shift selector button to select Auto Play option in the menu.
4. Press Set/ Function button to activate the Auto Play feature.
5. The images stored in memory will be displayed one after the other. You can press on
any button (except Browse button) to terminate the slideshow.
PC Mode
You can use USB mode to connect to a host PC. Before connecting to a printer or PC,
please see “Installing software and drivers”. After the camera is connected to a computer via
the USB cable, the camera can be set to either the USB Mass Storage and Video camera
options.
Storage option mode
The digital camera can act as an external storage or even as a card reader. This camera
can be used as an SD card reader with the following settings:
1. Please follow the instructions and install the application as shown in “Installing software
and driver”.