English
-38
connected to the printer. Only when the printer supports DPS, then you can use
this print interface to print the pictures.
Ú In the process of printing, if error messages occur on the LCD display, please refer
to the list for troubleshooting in the Appendix.
Setup menu
In mode main menu, use Up/ Down shift selector buttons, press Set/ Function button to
access Setup mode. In this mode, you can manipulate some specific settings and
functions. The mode includes two feature options, they are: system features table 1 and
system features table 2.
File duplication
1. Turn the camera on and ensure that it is in Setup mode.
2. Use the Up shift selector button to select option and use the Down shift selector
button to copy the files.
3. Press Set/ Function button to access the menu, press the Up/ Down shift selector
button to confirm or cancel.
4. Press Set/ Function button to confirm or cancel.
5. Press Mode selector button to exit.
Ú Note: the internal Flash memory’s copy is only compatible with DCF documents.
Ú If the external card has a DCIM parent directory and a 100FSCAM child directory,
the documents will be duplicated onto the 100FSCAM directory. Either way, the
system will first attempt to create a DCIM parent directory with a 100FSCAM child
directory, and duplicate the files into 100FSCAM.
Ú If there exist same filenames in the folder, the system will give these documents a
unique filename before duplicating into the 100FSCAM directory.
Time/ Date
Please see “Setting date and time”.
Formatting
Formatting the memory will delete all files that currently reside in the memory card and
internal memory.
To Next Page
Loading...
