English
-41
Ú According to the frequency of the current local fluorescent lamps, 50Hz or 60Hz is
an appropriate selection.
Default
Use the default option to reset all settings to the factory default.
To reset factory default settings:
1. Turn the camera on and ensure that it is in Setup mode.
2. Use the Up shift selector button to select option and use the Down shift selector
button to select the factory settings.
3. Press Set/ Function button to access the menu, press the Up/ Down shift selector
button to select or cancel.
4. Press Set/ Function button to confirm.
5. Press Mode selector button to exit.
To Next Page
Loading...
