Genius G-Shot D1211 - White Balance; Icon Display

English
-35
White balance
Use the white balance option to correct color for different lighting conditions. When white
balance is set to Auto, the camera automatically compensates for different lighting
conditions. You can also set white balance to any of these options: Sunny, Tungsten, or
Fluorescent.
To set white balance:
1. Turn the camera on and ensure that it is in Video mode.
2. Press the Mode selector button.
3. Use the Down shift selector button to navigate until the
White balance option is highlighted.
4. Use the Up shift selector button to select:
5. Auto
, Sunny , Tungsten , Fluorescent
6. Press the Mode selector button to confirm and exit the menu.
EV
Use the exposure compensation (EV) setting to change the
exposure for your videos. Usually this value would be set to
zero, but you might want to increase the exposure to
brighten a scene with strong back lighting, or decrease the
exposure if shooting a video in a very bright environment.
To set EV:
1. Turn the camera on and ensure that it is in Video
mode.
2. Press the Mode selector button.
3. Use the Down shift selector button to navigate until the EV option is highlighted.
4. Use the Up shift selector button to select:
5. From EV -2.0 to +2.0 EV (0.5 EV/ stop).
6. Press the Mode selector button to confirm and exit the menu.
Icon display
Use the display function to control turning the icons on and
off in the Video mode.
To set icon display:
1. Turn the camera on and ensure that it is in Video
mode.
2. Press the Mode selector button.