GEOMATE SG7 - Connecting to a Controller

Getting Started with SG7
GEOMATE SG7 GNSS USER GUIDE | 2022-07 P a g e | 20
2.7 Connecting to a Controller
2.7.1 Connecting via Wi-Fi with Mate Survey Software
Turn on the controller → run MateSurvey → go to Config main menu → tap Connect.
In the Connect screen, select GEOMATE for the Manufacture field, SG7 for Device Type field,
WIFI for
Connection Type field.
Tap the Wireless Lan icon on the right side to select the hot spot → Switch on the WiFi module
by the top switch → select the target device in the list.