GEOMATE SG7 GNSS USER GUIDE
|
2022-07
P
a
g
e
|
9
2
Getting Started with SG7
2.1
About the Receiver
The new GEOMATE SG7 GNSS receiver offers integrated IMU-RTK technology to provide a
robust and accurate GNSS positioning in any circumstances. Unlike the standard MEMS based
GNSS receivers, the SG7 GNSS IMU-RTK combines state-of-the-art GNSS RTK engine,
calibration-free professional IMU sensor and advanced GNSS tracking capabilities. Survey
projects are achieved with high productivity and reliability pushing the boundaries of
conventional GNSS RTK survey.
The LCD panel enables user to check satellite-tracking status, internal battery status, Wi-Fi
status, working mode, data logging status and basic receiver information. Bluetooth and Wi-Fi
technology provides cable-free communication between the receiver and controller.
The receiver can be used as the part of an RTK GNSS system with GEOMATE MateSurvey
software. Moreover, user can download the GNSS data that recorded in the internal memory
of receiver to a computer.
The receiver can be used as the part of an RTK GNSS system with GEOMATE MateSurvey
software. And you can download the GNSS data that recorded in the internal memory of
receiver to a computer.
To configure the receiver for performing a wide variety of functions, you can use the web
interface by connecting the receiver with PC or smartphone through Wi-Fi.
2.2
Parts of the Receiver
The operating controls are all located on the front panel. SIM card slot is on the backside. Serial
ports and connectors are located on the bottom of the unit.
2.2.1 Front Panel
The following figure shows a front view of the receiver.
To Next Page
Loading...