GeoVision GV-IP SERIES Quick Start Guide

8
3.2 Configuring the IP Address
If the camera is connected to a LAN without the DHCP server, the default IP address will be
192.168.0.10. Follow the steps below to modify the IP address to avoid IP conflict with other
GV-IP devices on the same LAN.
1. Open your Web browser, and type the default IP address 192.168.0.10.
2. Type the default username admin and a password. Click Login.
3. Go to Config > Network > TCP/IP to set the IP address.
4. Select Use the following IP address and then enter the static IP address and other
parameters.

GeoVision GV-IP SERIES Specifications

General

Brand	GeoVision
Model	GV-IP SERIES
Category	Security Camera
Language	English