GeoVision GV-IP User Guide

GeoVision Inc. 13 10/12/2023
Update
To update the speaker firmware, see 4.2 Updating the Firmware.
Working
Change the Run Mode of the speaker from BOOT to RUN.
Reset
Restart the speaker.
Enable this option to use the broadcasting method to set up a speaker when the
speaker and the computer used for configure it are on different network segments.
Machine ID. Enable BCastSend and MachID for speaker configurations when two
speakers have the same IP address.

GeoVision GV-IP Specifications

General

Brand	GeoVision
Model	GV-IP
Category	Media Converter
Language	English