GeoVision GV-IP User Guide

GeoVision Inc. 3 10/12/2023
2.2 Manually Adding a Speaker
To use this method, you must already know the IP address of the speaker in order to add it to
GV-Control Center.
Note: The speaker, by default, has a DHCP-enabled IP address, and no fixed IP address.
See 3. GV-IP Speaker Setting Kits for discovering its IP address.
1. On the Host List, click the Add button > Add Host > Add IP Speaker.
2. On this dialog box, configure the following settings:
◼ Host Name: Name the speaker.
◼ Address: Type the IP address of the speaker.
◼ ID & Password: Type ID and Password. By default, the ID is admin and the
Password is admin123.
◼ HTTP Port: It is port 554 by default.
3. Click Update Information to check if the speaker is connected successfully.
4. Click OK. The speaker is added to the Host List.

GeoVision GV-IP Specifications

General

Brand	GeoVision
Model	GV-IP
Category	Media Converter
Language	English