GeoVision Inc. 5 10/12/2023
2.4 Speaker Controls
Make sure a microphone has been installed in the GV-Control Center system before
broadcasting.
⚫ One-to-One Broadcast: To broadcast audio through a specific speaker, press and hold
the speaker icon. When the speaker is broadcasting, the icon turns orange.
⚫ Volume: To change the volume, right-click the speaker icon and select Volume Setting.
⚫ Play a WAV file:
1. Right-click the speaker icon, select Play Wave File and locate a .WAV file to play.
2. When the “Want to Repeat Wave File?” message appears, click Yes to play the
WAV file continuously.
3. To stop playing, double-click the speaker icon.
To Next Page
Loading...
Need help?
General
