Gerber EDGE FX Installation Guide

6
CHAPTER 2
Unpacking the GERBER EDGE FX
Unpacking the GERBER EDGE FX printer
The GERBER EDGE FX is shipped from the factory in reusable packaging materials. Save these
packaging materials for future use in case you need to ship the GERBER EDGE FX. This
document also includes detailed repacking instructions. Save this important document along
with the packaging materials for future reference.
CAUTION: Failure to repackage the printer with specified packaging materials may
result in damage to the unit during shipping. Always repack the printer as
described in this document. Gerber is not liable for shipping damage due to
improperly packed units. If you do not have the proper packaging materials, call
Gerber Service at 800-828-5406.
Contents of the GERBER EDGE FX shipping box
The GERBER EDGE FX is shipped in a single box which contains the printer, product
documentation, and an accessories box. The contents are as follows:
♦ GERBER EDGE FX printer unit
♦ GERBER EDGE FX Unpacking/Packing and Installation Guide
♦ GERBER EDGE FX Getting Started Guide
♦ Warranty Registration Card
♦ Documentation CD with GERBER EDGE FX Owner’s Guide
♦ Accessories box
♦ GERBER EDGE FX power cable (14.5 feet/ cm)
♦ GERBER EDGE FX CAT 5 cross-over Ethernet cable
♦ Thermal print head cleaning kit
♦ Two 10 amp fuses
♦ Foil squeegee (replacement)
♦ Material squeegees (replacements – qty. 2)
♦ 3M® Scotchcal 220 Series white film (10 yard roll)
♦ GERBER EDGE FX Foil Caddy
♦ GerberColor EDGE FX Foil (Spot Raspberry 15 meter roll)

Gerber EDGE FX Specifications

General

Print Technology	Thermal transfer
Resolution	300 dpi
Connectivity	Parallel
Media Types	Vinyl, Reflective
Max Media Width	15 in (381 mm)
Max Print Width	11.8 in (300 mm)