What to do if my Gerber Edge Printer shows a WARMUP ERROR?
If the Gerber printer displays a 'WARMUP ERROR' message that doesn't go away after 5 minutes, press the Reset key and contact the Gerber Field Service Department.
Why does my Gerber Printer say 'PAUSED'?
The 'PAUSED' message on the Gerber printer appears when you press ONLINE while the EDGE is printing. To resume printing, press ONLINE again. To return to OFFLINE status, press RESET.
What to do if my Gerber Printer displays a DATA ERROR?
If the Gerber printer shows a 'DATA ERROR', check the cabling between the computer and the EDGE. Ensure that the EDGE checksum setting matches the Gerber software checksum setting. If the message persists, contact your distributor or the Gerber Field Service Department.
What to do if my Gerber Edge displays a THERMISTOR ERROR?
When the Gerber printer displays 'THERMISTOR ERROR', wait for the printhead to cool down. The 'Paused' message will appear when the printhead is sufficiently cool.
How to fix 'CHECK FOIL' error on Gerber Printer?
If your Gerber printer displays 'CHECK FOIL', ensure that the foil is loaded correctly and then press ONLINE.
How to fix 'CHECK VINYL' error on Gerber Edge Printer?
If your Gerber printer displays 'CHECK VINYL', ensure that the vinyl is loaded correctly and then press ONLINE.
What does 'WARMING UP' mean on my Gerber Edge Printer?
When your Gerber printer displays 'WARMING UP', wait for the machine to warm up and for the OFFLINE message to appear.
What does 'PROCESSING IMAGE' mean on my Gerber Printer?
When your Gerber printer displays 'PROCESSING IMAGE', wait for the printing to start.
How to resolve 'CLOSE COVER' message on Gerber Edge?
If the Gerber printer displays 'CLOSE COVER', close the cover and press ONLINE.
What does 'INITIALIZING' mean on my Gerber Edge Printer?
When the Gerber printer displays 'INITIALIZING', wait for the OFFLINE message to appear.
Overview of the manual's content and structure.
Contact information for assistance and technical help.
Explanation of symbols, terms, and formatting used in the manual.
Essential safety warnings and precautions for operating the equipment.
Initial steps for preparing the GERBER EDGE for use.
Detailed instructions for safely removing the unit from its packaging.
Steps to prepare and send a print job to the GERBER EDGE.
Guide for correctly installing vinyl or other print media.
Instructions for installing and managing color cartridges.
Process for initiating and managing print jobs.
Steps for cutting printed designs using a plotter.
Guidelines for cleaning various components like printheads and platens.
Information on recommended print media and handling.
Proper storage and handling of color foil cartridges.
Cleaning instructions for critical print components.
How to clean the platen for optimal print results.
Solutions for common issues affecting print output.
Procedure for replacing blown fuses in the GERBER EDGE.
Contact details for receiving technical support.
Explains error messages and required user actions.
To Next Page
General
