Introduction 3
Safety
WARNING: Two people are required to lift or move the GERBER
EDGE. It weighs approximately 140 pounds (63.5 kilograms) packaged
for shipment and 90 pounds (40.8 kilograms) unpacked.
WARNING: Unplug the power cord before performing any
maintenance. Voltage is present inside the system even after the power
switch is turned off. All voltage is removed only when the power cord is
unplugged.
CAUTION: Static electricity may damage electronic components.
Ground yourself by touching any bare metal inside the GERBER
EDGE chassis prior to handling electronic components.
Setting Up the GERBER EDGE
The GERBER EDGE packages contain the GERBER EDGE,
accessories, a roll holder and tensioner, and a roll of Edge Ready vinyl.
ACCESSORIES
In the shipping container is the accessory tray containing the following:
!
A power cable
!
A printer cable
!
A black GerberColor Cartridge
!
Thermal Printhead Cleaning Kit
!
An accessory package consisting of:
!
Two 10-Amp fuses
!
GERBER EDGE Owner's Guide
!
Lint-free cloth
!
Cutter registration mark eyepiece
!
Pen printhead cleaner
To Next Page
Loading...
Need help?
General
