3.4 Monitoring with MAP
Monitoring the Network Interface Board
3-3
3.4 Monitoring with MAP
1.
To start MAP on your workstation, choose
Start
->
Map
->
Map
.
MAP lists IP print servers by their IP address and lists IPX print servers by their
SAP identification.
2.
Select the print server you want to access.
MAP sets up a link to the print server and obtains its HTML page.
3.5 Monitoring with a Web Browser
Once you have assigned an IP address to your Network Interface Board, you can use a
Web browser, such as Netscape Navigator or Internet Explorer, to view the Network
Interface Board HTML pages for monitoring and maintenance as follows:
1.
In your Web browser, choose
File
->
Open
.
2.
Enter the IP address of the Network Interface Board and click
OK
.
For example:
http://192.9.200.200
The HTTP Server screen opens.
If you have problems, make sure you are using the correct IP address.
To Next Page
Loading...
