Gestetner 1502 - Entering the Print Server Name; Configuring the Print Server

4.1 Configuring NetWare 3.x
NetWare Configuration
4-3
4.
Press the
Esc
key to return to the Available Options menu.
4.1.3 Entering the Print Server Name
1.
In PCONSOLE, choose
Print Server Information
from the Available Options
menu.
A list of existing print servers is displayed.
2.
Press the
Insert
key.
The New Print Server Name box is displayed.
3.
Enter the name of the print server.
On the printer status sheet, the print server name will appear under NetWare
information. The default name is the Network Interface Board serial number (six
digits with a three-letter prefix).
Note:
You can change the print server name using the MAP utility or a Web browser. See
Chapter 3,
Monitoring the Network Interface Board
.
4.1.4 Configuring the Print Server
1.
In PCONSOLE, choose the print server name from the Print Servers list.
The Print Server Information menu is displayed.
2.
Choose
Print Server Configuration
from the menu.
3.
Choose
Printer Configuration
.
The Configured Printers menu appears. Since this is a new Print Server entry, all
printers are labeled “Not Installed.”