Gestetner 1502 - 4.6 Configuring NetWare and Print Servers Using NWSetup

4.6 Configuring NetWare and Print Servers Using NWSetup
4-16
NetWare Configuration
To set up a Notify list:
1.
Log in to the file server and run PCONSOLE on that server.
2.
Choose
Print Servers
from the Available Options menu.
3.
Select the print server you want.
4.
Choose
Printers
from the Print Server Information window.
5.
Select the printer you want.
6.
In that printer’s Configuration Menu, choose
Notification
and press
Enter
.
7.
Press the
Insert
key to get a list of available options.
The Notify Candidates screen appears.
8.
Select the notification candidate you want.
The Notify Interval screen appears.
9.
Specify the notify intervals you want.
The
First
interval is the time the network waits before it notifies users about a
print job problem. The
Next
interval specifies how often users are notified.
10.
Press
Esc
and save all changes.
4.6 Configuring NetWare and Print Servers Using NWSetup
The NWSetup program lets you set up NetWare and your network interface card (NIC)
using one program. NWSetup combines the following configuration steps:
• Setting up the Novell file servers and print servers for NetWare printing (without
using NWSetup utilities)
• Setting up your print server printers for network printing
4.6.1 Installing and Running NWSetup
1.
Put the CD-ROM into your CD drive on your workstation.
2.
Choose
Start
->
Run
.
3.
Type the following command and click
OK
:
drive :\NWSETUP\SETUP.EXE
where
drive
specifies your CD drive.
4.
Follow the instructions in the Setup program.
After you install NWSetup, a program icon appears in your
Start
menu. To start the
program, choose
Start
->
NWSetup
->
NWSetup
.