Gestetner 1502 - Page 59

5.2 Windows IP Peer-to-Peer Printing
5-12
Windows Peer-to-Peer Printing
—
Name
Assign a name to identify the printer you want to add.
—
Port Number
Enter the port number of the printer. Default is 10001.
—
Description
Use this field to describe the printer’s physical location, the users who can ac-
cess the printer, or other convenient description information.
4.
When you have entered all the information, click
Add
.
The printer is listed in the
Available Printers
field at the bottom of the screen.
5.
Highlight the printer you have just added and click the S flag for this printer.
Using the Add Printers Wizard:
1.
Choose
Start
->
Settings
->
Printers
.
2.
Click
Add Printer
.
The Add Printer wizard appears. Click
Next
to proceed.
3.
Choose the
Local Printer
option and click
Next
.
4.
Select the make and model of the printer you want to use and click
Next
.
A list of printer ports appears. Any IP peer-to-peer printers that have been selected
from IP-P2P Setup appear in this list.
5.
Select the IP printer you want to use.
6.
Complete the remainder of the printer setup procedure normally.
To change the printer port:
1.
Right-click the printer icon.
2.
Choose
Properties
and then choose the
Details
tab (it can take up to 15 seconds
to access).
3.
Select the printer address you want to use from the
Print to the Following Port
list. (In Windows NT and Windows 2000, you must first deselect the previous
printer port.)
4.
Click
OK
.