Structure of this manual
• Chapter 1,
Introduction
, contains information about the Network Interface Board, its
features, and the hardware and NOS requirements.
• Chapter 2,
Installing the Network Interface Board
, explains how to install the card.
• Chapter 3,
Monitoring the Network Interface Board
, explains how to use the Management
Access Program (MAP) or a Web browser to configure and monitor the Network Interface
Board.
• Chapters 4 through 7 explain how to configure the Network Interface Board for specific
environments.
• Chapter 8,
Operation and Troubleshooting
, contains information on the LED status
indicators, printing status reports, and resetting the print server to factory defaults. It also
contains troubleshooting checklists.
• Appendix A,
Jumper Settings
, describes the jumper settings and locations.
• Appendix B,
Network Interface Board Specifications
, lists the general specifications for
the Network Interface Board, including the specifications for the 10/100BaseT cables.
To Next Page
Loading...