Gestetner 1502 - Page 76

7.7 Running Telnet
TCP/IP Configuration
7-15
The file modifications and conditions are:
To select the printer language:
1.
To access the LPD Printers menu, type
2
and press
Enter
.
For a unit at factory default, the following menu appears.
2.
To change the set of emulations, type
1
and press
Enter
.
The following options are displayed.
3.
To delete an emulation, select the number opposite the language listed and press
Enter
.
4.
From the LPD Printers menu, type
2
to toggle Banners between Enabled/
Disabled.
Print Server Setup Job detected as Action
PCL, (PostScript) ASCII <CR> changed to <CR><LF>
PostScript PCL, Other PostScript header added
not PostScript PostScript Job discarded
PostScript ASCII PostScript header added, <CR>
changed to <CR><LF>
PCL, PS, ASCII any No action
LPD Printers
1. Printer 1 PCL PS OTHER
2. Banners DISABLED
Printer 1 PCL PS OTHER
1. PCL
2. PS
3. ASCII
4. OTHER