Option B – After completing the wrapping cycle, the pressure plate rises
up and remains 500mm from the package.
KEY BUTTON
After all of function setting, press this button to memory.
TURNTABLE BUTTON
It is the manual button for the turntable.
First, Pressing this button first. Light is on.
Second, Pressing the “START” button to operate the turntable.
Finally, Pressing the button again to stop the turntable. Light is off.
During the operation of elevator, operator also can press this button to
control the turntable.
ELEVATOR BUTTON
It is the manual button for Elevator. After pressing this button, either left
or right lamp is on
When upper left lamp is on, the elevator will go up after pressing the
“START”.
In contrast, when its upper right lamp is on, the elevator will come down
after pressing the START.
To stop in a n y p o s ition simply p r e s s this button . B o t h lights wi l l b e o ff.
During the operation of turntable, operator can press this button to
control the elevator.
To Next Page
Loading...
