Master Card Testing Procedure with Toggle Switch On/Off for EXP-108
Toggle Switch:
#1 Continue running (factory testing use)
#2 N/A
#3 N/A
#4 N/a
#5 I/O display
#6 Self diagnose
#7 “Cod” cod 123 (EXP-108)
#8 Reset
Toggle Swi t ch 6 Oper a t i o n Explanatio n
1. Turn the Toggle switch to On position
2. Turned On the power
3. Press Start, the machine will start to run and the display will show EEE. 3
minutes later the machine will stop and the display will display error code.
E0 Carriage up limit X0
E1 Carriage down limit X1
E2 Carriage Height photo sensor X2
E3 Pre-stretch film feeding limit X3
E4 Turntable alignment proximity switch X4
To Next Page
Loading...
