Need help?Do you have a question about the Getac UX10 and is the answer not in the manual?
Guides on setting up the Tablet PC, including unpacking and initial setup.
Step-by-step instructions for installing the battery pack correctly.
Details on how to connect the Tablet PC to AC power for operation and charging.
Explains how to start up and shut down the Tablet PC, including sleep/hibernate.
Overview of the Tablet PC's external hardware components and their functions.
Explains how to use the touch-sensitive screen for navigation and interaction.
Instructions for connecting to LAN and wireless networks.
Steps to turn on/off WLAN and connect to a WLAN network.
Instructions for enabling Bluetooth and connecting to devices.
Details on the battery pack, including its role and care.
Step-by-step instructions and notes on charging the battery pack.
Understanding battery status indicators and appropriate responses.
Instructions for safely removing and installing the battery pack.
Procedure for replacing the battery while the Tablet PC is powered on.
How to use and set up the fingerprint scanner for authentication.
Explains when and how to access the BIOS Setup Utility.
Information on security settings within the BIOS Setup.
Configuration of boot order and device settings.
Overview of the G-Manager tool for system configuration and management.
Recommendations for maintaining battery health and lifespan.
Initial steps to take when encountering a problem with the Tablet PC.
Solutions for common issues related to battery, Bluetooth, and display.
Methods to reset or reboot the Tablet PC when it hangs.
Procedures for restoring the system using Windows RE.
Steps to restore the system to factory default using the recovery partition.
Critical safety instructions and warnings for handling the battery.
FCC and Canada RF exposure compliance requirements and notices.
To Next Page
General
