30
Replacing the Battery Pack
CAUTION:
There is danger of explosion if the battery is incorrectly replaced.
Replace the battery only with the Tablet PC manufacturer’s battery
packs. Discard used batteries according to the dealer’s instructions.
Do not attempt to disassemble the battery pack.
NOTE:
You can hot swap the battery pack if your model has the bridge battery.
If you have the high capacity battery model, the battery pack looks
different from the one shown here. The removal and installation method
is the same.
1. Turn off the Tablet PC and disconnect the AC adapter.
Skip this step if you are hot swapping the battery pack. (See “Hot
Swapping the Battery Pack (Optional)” for more information.)
2. Slide the security lock of the battery release latch to the unlocked
position (
). Slide the battery release latch upwards (). The battery
pack will slightly pop up. Remove the battery pack from its
compartment (
).
To Next Page
Loading...
