Getac ZX70 - Chapter 6 Managing Your Device; Managing Power; Low Battery Signals and Actions

39
Chapter 6
Chapter 6Chapter 6
Chapter 6
Managing
ManagingManaging
Managing Your Device
Your DeviceYour Device
Your Device
This chapter tells you how to manage power and configure your device.
Managing Power
Managing PowerManaging Power
Managing Power
The operating time of a fully charged battery depends on how you are using the
device. Some functions, such as using multimedia or operating an SD card, may
consume the battery power considerably.
Low Battery Signals and Actions
Low Battery Signals and ActionsLow Battery Signals and Actions
Low Battery Signals and Actions
CAUTION: When you recharge the battery upon a warning of low
power, you should charge for at least 30 minutes. If you unplug
the AC adapter soon, you may not have sufficient battery power
for your operation.
The battery status (charging or discharging) and level (as a percentage of fully
charged) are displayed at the top of the screen. To check the battery information,
go to Settings
Settings Settings
Settings  Battery
BatteryBattery
Battery.
You should save your data and recharge the battery immediately upon a warning
of low power; otherwise your device will turn off automatically. You need to connect
the device to external AC power for charging before you can use it again.