4
Installation instructionsDecomat 4656
9809
Installation
• Pull the machine (standing on a transport pallet) to where it is to stand.
• Remove the detergent compartment.
• Lift the machine from the transport pallet.
• Place the machine in position and set the adjusting screws of the feet to make
the machine stand firm and level. Check with a spirit level as shown in figure
1 to ensure that the machine is level.
• Refit the detergent compartment.
Fig. 1. Adjusting
V222
Adjust the machine with
aid of spirit level
If the machine is to be moved using a fork-lift truck:
• Position the forks of the truck as illustrated in figure 2 so as not to damage the
machine.
Fig. 2. Positioning the fork-lift forks.
Bottom frame
V318
To Next Page
Loading...
