Getinge Lucea 50 Maintenance Manual

5
Recording the inspection
SW Service Protocol PM OR Lights LUCEA 50 100-A
40 / 44
Lucea 50_100
01740 EN 01
Document name: SW Service Protocol PM OR Lights LUCEA 50 100
4
www.getinge.com
Form:
STI-P01
-F11
-B-en
8. Optical evaluation
Measure the illumination at the center, at 1 meter, small light patch (with dimmer at max setting).
The IEC 60601-2-41 standard indicates the limits between 40 000 lux minimum & 160 000 lux maximum.
The minimum acceptable value has been calculated from the nominal illumination values -30%.
9. Electrical Safety Tests (IEC 62353)
Pass
Fail
N/A
Continuity test 1
Continuity test 2
Test records should be enclosed to this report for any further use, when available.
10. Function test
Pass
Fail
N/A
All LEDs operate correctly
ON / OFF
(Light head button)
Illumination increase / decrease level
(Light head capacitive keypad)
Wireless remote control operates correctly
Camera operates correctly
Switch over to battery mode and back to mains
Batteries charge indicator brights when light is off
Illumination
Acceptable
values (klx)
Measured value
(klx)
Pass
Fail
N/A
Ec Max LUCEA 50
40 < Ec < 160
Ec Max LUCEA 50
40 < Ec < 160
Ec Max LUCEA 100
70 < Ec < 160
Ec Max LUCEA 100
70 < Ec < 160
Limit (mΩ)
Measured values (mΩ)
Pass
Fail
N/A
Protective earth continuity 1
≤ 300 mΩ
Protective earth continuity 2
≤ 300 mΩ

Getinge Lucea 50 Specifications

General

Brand	Getinge
Model	Lucea 50
Category	Medical Equipment
Language	English