ECdrive H
5
Overview
4 Overview
4.1 Diagrams
Drawing no. Type Name
70517-ep01 Installation diagram ECdrive H ISO-glass tting
70511-9 - 0968 Wiring diagram DCU1/DCU1-2M
70722-9-0956 Additional wiring diagram DCU1/DCU1-2M for hospitals
70515-9-0982 Cable plan DCU1-NT-OP
70517-0-001 Drive drawing Drive system ECdrive H
70517-2-0224 Cover
70517-2-0223 Side plate
70517-2-0201 Running rail
70511-9 - 0967 Safety analysis
70715-9-9879 Installation instructions ISO-leaf ECdrive H
70517-2-0229 at spring
The diagrams are subject to change without notice. Use only the most recent version.
4.2 Tools and aids
Tool Size
Tape measure
Marking pen
Torque spanner
Allen key 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm
Open-ended spanner 8 mm, 10 mm, 13 mm, 15 mm
Screwdriver set up to 6mm
Torx bit T x 20
Side-cutting pliers
Crimping pliers for cables
Wire stripper
Multimeter
Display programme switch DCU1 (Mat. No. 103940)
Key-operated switch (ECdrive-FR only) (Mat. No. 074437)
4.3 Torques
see overview plan
4.4 Components and assembly groups
For components and assembly groups, see overview plan
To Next Page
Loading...
Need help?
General
