ECturn
10
Cleaning and maintenance
Cleaning and maintenance8
CAUTION!
Danger of injury due to impact and crushing!
The mounting, maintenance and repair work must be performed by properly trained personnel authorised by
X
GEZE.
Disconnect the drive from the power supply before carrying out work.
X
Unplug the battery plug from the controller before carrying out work.
X
Secure door leaves against accidental movement before carrying out work.
X
Ensure that the drive cannot be activated via radio or Contactor authorised (KB).
X
Cleaning
Component Cleaning
Safety sensor close (SIS, e.g. light sensors) Wipe with a moist cloth.
X
Glass surfaces Wipe with a cold vinegar/water mixture; then dry.
X
Stainless surfaces Wipe with a non-scratching cloth.
X
Painted surfaces Wipe with water and soap.
X
Anodised surfaces Wipe with non-alkaline potassium soap (pH value 5.5…7)
X
Maintenance
The owner must ensure that the system functions properly.
GEZE oers maintenance contracts with the following services:
Inspect fastening elements for rm seating à
Carry out miscellaneous adjustment work à
Carry out operational checks à
Check all the safety and control equipment of the door system à
Lubricate all the moveable parts à
If maintenance is required, notify the service technician.
X
Inspection by trained professionals
In accordance with the "Guidelines for power-operated windows, doors and gates" (BGR 232 and GUV 16.10) Sec-
tion 6, power-operated doors must be inspected for safety by a trained professional before initial commissioning
and at least once a year.
To Next Page
Loading...
Need help?
General
