ECturn
4
Safety instructions
Safety instructions3
Thoroughly read and abide by this user manual before commissioning the door. In addition, always observe the
following safety precautions:
The prescribed mounting, maintenance and repair work must be performed by properly trained personnel à
authorised by GEZE.
The country-specic laws and regulations are to be observed during safety-related tests. à
GEZE shall not be liable for injuries or damage resulting from unauthorised modication of the system. à
GEZE shall not be liable if products from other manufacturers are used with GEZE equipment. à
Only original GEZE parts may be used for repair and maintenance work as well. à
The connection to the power supply must be made by a professional electrician. Perform the power connec- à
tion and safety earth conductor test in accordance with DIN VDE 0100-610.
Exception: If the ECturn swing door drive is connected to the mains voltage by the mounted power plug, the
connection does not have to be carried out by a qualied electrician.
Use a customer-accessible 10-A automatic circuit-breaker as the line-side disconnecting device. à
Protect the programme switch against unauthorised access. à
If a battery is connected: à
Check the battery function once a month. à
Recycle defective batteries. à
If changes are carried out in the detection eld of the safety sensors (e.g. objects added or removed): Reteach à
the drive.
Observe the latest versions of guidelines, standards and country-specic regulations, in particular: à
BGR 232 "Guidelines for power-operated windows, doors and gates" à
DIN 18650 "Building hardware - Powered pedestrian doors" à
VDE 0100; Part 610 "Erection of low-voltage installations" à
Accident-prevention regulations, especially BGV A1 "General regulations" and BGV A2 "Electrical systems à
and equipment".