4 Product description, equipment Operating instructions IM 160
8
4.2 Standard equipment
Base machine
– High-precision, distortion-free and robust machine base
– Hardened, chrome plated guide shaft
– Handwheel for easy moving of machine carriage
– Exact pressure adjustment via direct manual load transfer
– Fusion pressure is maintained with a user-friendly fast-locking handle
– Sturdy base clamping plates, right and left d 160 mm
Planer
– Optimized cutting geometry for even and chatter – free planing
– Powerful electric motor, can be swiveled in and out, for single or
double – sided facing of pipe ends
Heater
– With electronic temperature control
– High temperature accuracy of 4 °C
– Can be used as manual fusion device
– Metal sheet cover to protect the heating plate in idle position
– Non-stick PTFE -coated
Additional standard equipment on the basic model
– Reduction clamping inserts 40*–140 mm
– Pipe supports for picking up reduction inserts d 40*–140 mm
– Reduction inserts for supports d 40*-140 mm
– Timer to clock fusion times
– Specific tool set
– Wooden transport crate, also usable as working bench
* Reduction inserts for fusion of d 32 mm pipes and fittings are also
available (to be ordered separately)
To Next Page