6 Transport and assembly Operating instructions IM 160
14
Fix the back-stop (optional) on the base machine
Store the machine tool set into the drawer.
Store the reduction inserts set into the drawer (special transport
crate only).
Transport insurance should be provided for according to the type and
duration of transport. Condensation due to large temperature
fluctuations and sharp jolts during shipment should be avoided.
Please handle the IM 160 with care.
6.3 Intermediate storage
If the IM 160 is not used immediately upon delivery, the machine must
be stored in a safe place and properly covered.
6.4 Scope of delivery
The contents (number of transport crates, pallets, packages) and their
condition should be checked immediately upon receipt. Any damage
and/or missing parts should be noted right away on the bill of delivery
and reported to Georg Fischer Omicron s.r.l. without delay.
To Next Page