4To reassemble, reverse the order of the previous
operations.
5 Remount the starting system [
6.2.A
].
WARNING! Check that the petrol pipe (4) is
intact and secured correctly before pouring in
new fuel.
B) Cleaning the tank
1 Remove the starting system [ 6.2.A
].
12 Remount the tank [
6.1.A].
13 Remove the clip (6) from the side of the tank and
disconnect the petrol pipe (2).
14 Pull out the stalk of the filter (7) and blow com-
pressed air so as to remove the deposits pres-
ent inside.
15 Keep the tube hole (8) closed, pour in approx.
100 cl of clean petrol and shake well to clean
inside the tank.
16 Empty the tank and dispose of the petrol used
for cleaning in accordance with the laws in
force.
17 Remount the tank [
6.1.A
].
18 Remount the starting system [
6.2.A ].
WARNING! Check that the petrol pipe (4) is
intact and secured correctly before pouring in
new fuel.
C) Checking and cleaning the breather pipe
21 Remove the cap (21) and pull out the gasket (22)
and the sponge (23).
22 Check that:
– the gasket (22) is intact and without cracks or
fissures;
6.1.1
TANK AND SUPPLY
2 / 3
SERVICE MANUAL
page
from
2007 to ••••
4/2007© by GLOBAL GARDEN PRODUCTS
SV200 R200
21
6
4
8
7
5
5
2
To Next Page
Loading...
Need help?
General
