Instruction Manual Mitras LX7
EN 2016-12-27 33
6.5.1 Saving Settings
Settings of the connected Mitras LX7 are stored in a file (File name .par).
How to read the settings or sensor data from the Mitras LX7 ?
The PC program uses parameter definition files (file extension .def) to know which settings
should be available or read out in the connected luminaire. These files are located in the GHL
Control Center program directory.
The appropriate parameter definition file must exist for the firmware version of the
respective device. For the firmware version 1.00 of the Mitras LX7, for example, the file is
called ParaList_V100_Mitras LX7.def.
6.5.2 Loading Settings
Settings or sensor data are loaded from a file (file extension .par) and transferred to the
respective device. If the file comes from a ProfiLux with a different firmware version as the
target device, a warning is issued.
Settings that originate from a device with a firmware version older than the firmware version
of the target device can be loaded without problems. If you load settings from a device with a
newer firmware version to a device with older firmware, problems can occur.
If a problem occurs during the transfer of the settings to the respective device, a message is
displayed. If the message is ignored, the transmission of the remaining settings is continued.
If the device type does not fit, the operation is aborted completely.
Basically, all settings found in the file are transferred to the connected luminaire.
If only some of the settings should be transferred, the file can be edited accordingly. The
lines in the file containing entries with settings that are not to be transferred may be deleted
via a text editor for example.
7 Warranty/Liability
You have a 2-year warranty beginning from invoice date. This applies to material and
manufacturing defects.
We guarantee that the supplied products correspond to the specifications outlined and that
the products do not have material resp. manufacturing defects. For the accuracy of the
manuals, we do not guarantee damages of any kind which result from improper usage or
from an unsuitable environment. Furthermore, we do not accept warranty claims for
damages that are caused by a false connection or excessive humidity. We assume no liability
To Next Page
Loading...
Need help?
General
