Instruction Manual Mitras LX7
EN 2016-12-27 34
for direct damages, indirect damages, consequential damages and third party damages as
far as it is legally permitted. We do not take over guarantee that our product package
corresponds to the requirements of the buyer. Our warranty expires if the delivered original
product is damaged or modified.
8 Additional Information
8.1 Help and Information
For help or further information, please visit our Support Forum at
www.aquariumcomputer.com or contact your retailer.
8.2 Firmware-Update
The firmware of your Mitras LX7 is constantly being further developed. If you want to use new
features that are not supported by your current firmware, you can update your controller.
For the update, you need the latest firmware and the PC program GHL Control Center, both of
which can be downloaded free of charge from our homepage www.aquariumcomputer.com
in the download area (Support-> Downloads), as well as our USB cable.
Instructions for updating firmware can be found from our homepage.
9 Technical Data
The device and its accessories may only be used indoors. Moisture or excessive
humidity can lead to malfunctions or damage.
Wide range power supply 100 – 240 VAC (50 – 60 Hz)
DANGER
Be sure to back up your data before updating!
You can use the menu item
"Backup and Restore" -> "Transfer all settings from Mitras LX7 to file"
and load them again after the successful update via "Transfer from
file to Mitras LX7".
To Next Page
Loading...
Need help?
General
