GHL Mitras LX7 - 3 Connections of the Mitras LX7; 3.1 General; 3.2 Connection Overview

Instruction Manual Mitras LX7
EN 2016-12-27 8
 No water must enter the luminaire through the ventilation slots.
 The luminaire must not be exposed to fine dust which can occur
during renovation work or drilling holes. Always protect the
luminaire from these particles.
 Salt deposits must be removed immediately.
 Please note that improper or neglected care may result in damage
not covered by the warranty.
3 Connections of the Mitras LX7
3.1 General
Applies to all connections:
3.2 Connection Overview
The Mitras LX7 has the following connections:
WARNING
 Connect only original accessories from GHL.
 Do not use force when plugging connectors. If a plug contact does
not fit, it is imperative to check that you have chosen the correct
socket..